Customer Login

Fitting Your NousCap

• Remove NousCap from packaging.
• Remove the existing fuel cap from your vehicle.
• First check that you have purchased the correct NousCap in relation to the fuel used in your vehicle.
  If your vehicle has a diesel engine the NousCap should be black and yellow in colour and have a “D” on the NousCap plug
  If your vehicle has a petrol engine the NousCap should be green and yellow in colour and have a “P” on the NousCap plug.
• Check that the NousCap has the same fitting arrangements as your existing fuel cap.
• Fit NousCap into the fuel filler neck of your vehicle and tighten in a clockwise direction.
• Once tight the NousCap should ‘click’ and then feel loose.
• If you can turn the NousCap in either direction without it coming away from the vehicles filler neck then you have successfully and correctly fitted it.
• If you have purchased a locking NousCap then you can now insert the key and lock it.
• If you have been unsuccessful, then repeat the above steps.
  If problem persists then contact the place from where the NousCap was supplied or purchased.

Using Your NousCap

• If a locking NousCap is fitted then first un-lock NousCap using the key supplied and then remove key.
• Rotate NousCap until the arrow on the top surface points upwards (i.e. “12 o’clock”).
• Plastic gloves should now be worn (these will be located near to the fuel pump on station forecourt).
• Remove fuel nozzle from fuel pump and locate firmly over NousCap plug.
  Note;
  The plug is marked “D” for a diesel fuel nozzle and “P” for a petrol fuel nozzle.
  If fuel nozzle does not fit over the NousCap plug, you have selected the wrong fuel nozzle or possibly the end of the fuel nozzle is damaged.
• ! DO NOT FORCE NOZZLE ONTO THE NOUSCAP (this will damage the NousCap).
• Once nozzle has located over NousCap plug, rotate nozzle slightly (i.e. between 5 and 10 degrees) in an anti-clockwise direction.
• NousCap has now been loosened.
• Remove fuel nozzle from NousCap plug, then with your other hand remove NousCap until clear of fuel filler on vehicle.
• Insert fuel nozzle into vehicles fuel filler neck and replenish vehicle with the required amount of fuel.
• Replace fuel nozzle into fuel pump.
• Refit NousCap into fuel filler and tighten in a clockwise direction until you feel the NousCap ‘click’.
• NousCap will now be easy to turn, but cannot be removed until the correct fuel nozzle is applied again.
• Insert key and lock if you have a locking NousCap.